A continuous-wave laser source platform spanning 320 nm to 1080 nm at 5 mW to 50 W, available free-space or multimode fiber-coupled. Every unit ships with its own measured L-I curve, spectrum and stability record against its serial number. Designed and manufactured in India.
A continuous-wave laser source platform spanning 320 nm to 1080 nm at 5 mW to 50 W, available free-space or multimode fiber-coupled. Every unit ships with its own measured L-I curve, spectrum and stability record against its serial number. Designed and manufactured in India.
Standard catalogue lines: 320, 375, 405, 450, 520, 532, 635, 639, 660, 750, 780, 785, 808, 850, 915, 980 and 1064 nm. Other wavelengths in the window on request.
Tunable from 10 % to 100 %. Available power depends on wavelength — 50 W is the platform maximum, not available at every line.
At Tc = 25 °C, with an option for ≤ ±1 %. Measured performance on direct-diode units is typically far better.
Free space with a fixed collimator giving roughly 5 mm at 10 cm, or multimode fiber-coupled with 200 µm or 400 µm core.
Selected by power. One metre standard length, longer on request.
Mains rocker, keyswitch laser enable with emission LED, four-digit drive-current display and single-turn current control.
Keyswitch arming, emission indicator and a rear remote interlock. Wavelength-matched goggles available.
L-I curve, spectrum and stability log issued against the serial number, signed by the inspector and countersigned on approval.
One year warranty from acceptance, minimum five years spares, service and training in India.
Our catalogue figure for power stability is ≤ ±3 % over two hours at 25 °C. Our delivered direct-diode units measure very much better than that: a 405 nm / 50 mW unit logged 0.049 % relative standard deviation over 13,999 samples across 3.9 hours; an 808 nm / 3 W fiber-coupled unit logged 0.23 % across 548,254 samples. Every unit is shipped with its own signed test record, so you are never asked to take the catalogue number on trust. Note that these results are for direct-diode lines — DPSS wavelengths behave differently and are characterised separately.
Our Windows application handles live view, regions of interest, minimum, maximum and average values, trend plots and alarms, with export to Excel and MP4 and retention of raw data for re-analysis later. An SDK is available where the system is being embedded into your own application.
Because the software is ours, a change you need is a change we can make — you are not waiting on an overseas vendor's release cycle.
| Stage | Interface | Purpose |
|---|---|---|
| SP2L-CWLS | Ethernet | Data and control from the system |
| SPPL Software | Windows application | Acquisition, analysis, logging, export |
| I/O module | Digital / analogue | Signals to plant equipment |
| PLC / SCADA | Your control system | Line integration and process control |
From acceptance at your site, not from dispatch.
Spares availability guaranteed for at least five years.
Our own engineers, in your time zone.
Your operators trained on the installed system.
Specifications are configurable and subject to change without notice; the final configuration is confirmed per application at the time of quotation.
Tell us the material, the feature size and the throughput you need, and we will configure the system around it.
